Dell Precision 330 User Manual page 90

90 Ins ta l l i n g Up g r a d es
Connect a DC power cable to the power input connector on the back
9
of the drive (see the following figure).
A t t a c h i n g H a r d - D r i v e C a b l e s ( D e s k t o p C h a s s i s )
DC power cable
Ensure that all cables are firmly connected. Fold cables out of the way
10
to provide airflow for the fan and cooling vents.
Ensure that the control panel cable is firmly connected to the system
11
board.
The control panel contains the hard-drive activity indicator. To locate
the control panel system board connector, see
Components."
Replace the computer cover, reconnect the computer and peripherals
12
to their electrical outlets, and turn them on.
NOTE:
message to be displayed at the next system start-up:
primary system board EIDE connector
Chassis Intrusion
If enabled, the
power input connector
interface connector
interface cable
"System Board
option will cause the following