A t t a c h i n g D r i v e C a b l e s ( M i n i To w e r C h a s s i s )
power input
connector
DC power cable
Ensure that all cables are firmly connected. Fold cables out of the way
10
to provide airflow for the fan and cooling vents.
If the chassis drive bay was previously empty, remove the
11
corresponding insert from the front panel.
Hold the front panel with the outside facing you. Press the ends of the
insert with your thumbs until the insert snaps free of the front panel.
Replace the front panel.
12
secondary
system board
EIDE connector
interface cable
interface connector
In s ta l l i n g U p gr a d e s
73