Mouse Problems - Dell Precision 330 User Manual

No. Go to step 4.
Turn off the computer and the device, swap the device's cable with a
4
known working cable, and then turn on the computer and the device.
Is the device working properly?
Yes. You need a new device cable.
assistance.
No. Go to step 5.
Turn off the computer and the device, swap the device with a
5
comparable working device, and then turn on the computer and the
device.
Is the device working properly?
Yes. You need a new device.
No. Contact Dell for technical assistance.

Mouse Problems

Basic Checks:
• Disconnect the cable from the computer and check the cable
connector for bent or broken pins. Check for damaged or frayed cables.
• Ensure that the cable is firmly connected to the computer.
• If you are using a Universal Serial Bus (USB) mouse, ensure that you
connect to one of the Port 1 USB connectors on the system back panel
(see "Back-Panel Connectors and
• Reinstall the mouse driver for your operating system.
• Restart the computer.
If the problem still exists after you complete the basic checks, fill out the
Diagnostics Checklist as you perform the following steps:
If you are using a Personal System/2 (PS/2) mouse, enter
1
and ensure that Mouse Port under the Integrated Devices option is set
to On. Then exit system setup properly to save the information, and
reboot the system.
Is the device working properly?
Yes. The problem is resolved.
Contact Dell for technical
Contact Dell for technical assistance.
Indicators").
system setup
S o lv ing Pr o ble m s
129