Border; Background - Datavideo SE-500 Instruction Manual

Border

These controls are used in conjunction with the Picture in Picture Effect and Wipe transition only, and can
only be activated when the Picture in Picture or Wipe control is active.
8 Colors are available for the wipe border: black, blue, magenta, red, green, cyan, yellow and white. See
"Background Color" below. (Wipe only). In PIP mode the border can only be white.

Background

While not strictly an effect, these controls are in the same general area, and we thought you'd look here for
any information you might need. These controls select what solid color the background will be when selected
on either the Main or Sub Video bus. There are eight possible background colors; see below, the LED lights
up in the selected color (except for black where the LED goes out), and it is indicated on the preview monitor
output.
The background colors are: black, blue, magenta, red, green, cyan, yellow, and white.
Engage this control by pressing the button. The LED's color will correspond with the background color
(except black) to indicate that the controls are active. Repeated presses of the button select different colors.
28