Datavideo SE-500 Instruction Manual page 45

Datavideo BAC-03 Balanced-Unbalanced Audio converter
The BAC-03 is a bi-directional unbalanced to balanced and balanced to unbalanced audio converter, with
four independent amplifiers providing stereo audio input and output.
SPECIFICATIONS
INPUT LEVEL
INPUT IMPED
GAIN
OUTPUT LEVEL
OUTPUT LOAD
FREQ RESPONSE
NOISE LEVEL
DISTORTION
POWER INPUT
DIMENSION
Bi-Directional IEEE/1394 DV Format Repeater:
Allows extended DV cable runs. If you want to run
a DV cable more than 20 meters an in-line booster
is required, the DV repeater is just that. Use one
every 20 meters for cable runs of up to 200 meters
One input to five channels output DV-DA (VP-332)
Please check website (www.datavideo-tek.com) for the most up to date list, descriptions, and pricing of
accessories for the SE-800.
UNBAL to BAL output
-10dBv nominal
50K ohms
+4 to +20dB
0 to +8dBm nom, +22dBm max
600 ohms or higher, balanced
DC to 25kHz, +/-0.5dB
80dB below nom output level
<0.01% at any frequency
DC 12V, 200mA
140(W) x 112(D) x 40(H) mm
44
BAL to UNBAL output
0dBm to +8dBm nominal
0K ohm
-20dB to +18dB
-10dBv nom, +20dBv max
600 ohms or higher, unbalanced
DC to 25kHz, +/-0.5dB
80dB below nom output level
<0.01% at any frequency
One channel DV repeater (VP-314)
20/10 meter DV
cable
P/N: 2066/1066