Pip Position; Pip Border - Datavideo SE-1200MU Instruction Manual

7.3.1 PIP Position

Values are shown along the bottom of the screen.
The X and Y values change the location of the PiP image.
• The X value moves the image left and right.
• The Y value moves the image up and down.
• The Z value adjusts the image size. Where the value 1.0 makes the PiP occupy the whole screen (100%),
and 0.5 reduces the PiP size to half screen (50%).

7.3.2 PIP Border

The PIP Border options and values are currently shown along the bottom of the display below.
• Click and hold the joystick circle then drag the joystick circle in the desired
direction.
• Left-mouse button Joystick dragging allows the PiP to be moved in the X & Y
directions.
• Right-mouse button Joystick dragging to the left and right resizes the PIP (Z
value).
• Click the FINE button to enable/disable fine adjustment in smaller/slower steps.
• Click the NORM button to return the selected PIP image to the factory default
position and size values as shown above. The Norm button default for Z value
(size) is 0.40 or 40%.
Step 6: PiP options displayed in the yellow menu area:
Position, Border and Crop. The sections below will
describe how Position, Border and Crop can be
adjusted.
36