Replacing The Standard Ps - Fujitsu PRIMERGY TX150 S5 Service Supplement Manual

Replacing the standard PS

Replacement routines
4.5 Replacing the standard PS
Ê Open the server as described in the section "Preparation" on page 17.
I
You can replace the power supply without removing the adapter plate.
Ê Disconnect all power cables from the system board and the drives (see the
cabling plans in the Appendix of the Options Guide).
Figure 6: Removing the screws
Ê Remove the four screws of the standard power supply (see the circles).
24 Service Supplement
TX150 S5