Fujitsu PRIMERGY TX150 S5 Service Supplement Manual page 35

Replacement routines
1
Figure 17: Fixing the processor
Ê Fold down the frame (1).
V
CAUTION!
The processor holder must fall down by itself. Do not close with force,
because soldering pads may be damaged.
Ê Press the lever slowly downward (2) until it is hooked in again (3).
Ê Apply a small amount of thermal paste to the upper side of the new
processor.
Ê Ensure a thin and even distribution of the thermal paste.
TX150 S5
2
Service Supplement
Replacing the processor
3
35