Replacement routines
Figure 3: Removing the DVD/DVD-RW drive
Ê Press together the two springs of the EasyClick rails until they are unlocked
(1).
Ê Pull the drive out of its bay(2).
Ê Remove the EasyClick rails from the drive by removing the two screws on
each side. Notice the positions of the holes used.
Ê Screw the two EasyClick rails on both sides of the new drive.
Ê Push the new drive into the bay until the locking mechanism of the EasyClick
rails engages.
Ê Reconnect the power and the data cable.
Ê Close the server and connect all power plugs (for a detailed description see
the Options Guide).
TX150 S5
Replacing the DVD/DVD-RW drive
1
Service Supplement
1
2
21