Receiving Calls; Handsfree; Make Handsfree Call - BT Zenith Flip 6861 User Manual

20 Using the phone
If you have assigned a different
ringtone for the caller's number
stored in the phonebook, you will
hear the ringtone you have selected.
See page 27. Please note you need
to subscribe to a Caller Display
srvice for this feature to work.
See page 63 for more information
on auto talk.
Handsfree switches on the handset
loudspeaker so you can talk to
your caller without holding the
handset. It also enables other
people in the room to listen to
both sides of your conversation.
If you experience any problems, please call the Helpline on 0870 605 8047
BT Zenith Flip – Issue 1 – Edition 04 – 08.09.05 – 6861

Receiving calls

Providing you have subscribed to your network's Caller
Display service, the caller's number (and name if stored
in the phonebook) is displayed.
When the handset is closed, the exterior screen shows
the caller's details and
Open the handset to automatically answer the call. If auto
talk is set to OFF, you will need to press

Handsfree

Make a handsfree call
1. Press
Your call can be heard over the handset's loudspeaker.
2. To switch back to the handset at any time, press
again. Press
During a call you can open the phonebook by pressing
Names
the phonebook. To use the phonebook, see page 25.
External Call
. The display shows
to end the call.
and add, view details, delete or edit an entry in
or Internal Call .
.
. Dial the number.