Getting Started; Location; Setting Up - BT Zenith Flip 6861 User Manual

Getting started

8
WARNING
Do not place your BT Zenith Flip
in the bathroom or other
humid areas.
Handset range
The BT Zenith Flip has a range of
300 metres outdoors when there is
a clear line of sight between the
base and handset. When there is
no clear line of sight between the
base and handset, e.g. base
indoors and handset either indoors
or outdoors, the range could be
reduced to 50 metres. Thick stone
walls severely affect the range.
Signal strength
The symbol on your handset
screen indicates when you are in
range. When you are out of range,
it flashes. You will also hear
warning beep. During a call, you
will hear an out of range warning
beep in the earpiece.
IMPORTANT
Do not connect the telephone line
until the handset is fully charged
for 24 hours. The base must be
plugged into the mains power at
all times.
Which socket?
Power socket
Telephone line socket
If you experience any problems, please call the Helpline on 0870 605 8047
BT Zenith Flip – Issue 1 – Edition 04 – 08.09.05 – 6861

Location

You need to place your BT Zenith Flip within 2 metres of
a mains power and telephone socket so that the cables
will reach.
Make sure it is at least 1 metre away from other
electrical appliances to avoid interference.
Your BT Zenith Flip works by sending radio signals
between the handset and base. The strength of the
signal depends on where you site the base. Putting it as
high as possible ensures the best signal.

Setting up

1. Plug the mains power cable into the base.
Route the cable through the channel on the base.
Plug the other end of the cable into the wall socket.