BT Zenith Flip 6861 User Manual page 9

2. Insert handset battery. Push in the button on the battery
compartment cover
Li-ion battery supplied into the handset
the cover .
4
2
1
3. Charge the handset for at least 24 hours by placing it on
the base. The red charging light comes on. The exterior
screen shows the clock. The handset is pre-registered to the
base as Zenith 1. The screen shows the standby display.
The red charging light stays on while the handset is
being charged. Once fully charged the light will go off.
If you experience any problems, please call the Helpline on 0870 605 8047
BT Zenith Flip – Issue 1 – Edition 04 – 08.09.05 – 6861
and slide the cover off
1
3
4
3
Battery low warning
The handset battery symbol is
. Slot the
empty and flashing and you will
2
hear a warning beep every 30
and replace
seconds. Start recharging your
handset right away or the handset
will shut down.
When charging the battery symbol
is animated.
Getting started 9