Environmental; Connecting To A Switchboard; Dialling Mode - BT Zenith Flip 6861 User Manual

80 General information

Environmental

Do not expose to direct sunlight.
I
The handset may become warm when the battery is being recharged. This is normal.
I
We recommend that you do not place the product on antique/veneered wood to
avoid damage.
Do not stand your product on carpets or other surfaces which generate fibres or place it
I
in locations preventing the free flow of air over its surfaces.
Do not submerge any part of your product in water and do not use it in damp or humid
I
conditions, such as bathrooms.
Do not expose your product to fire, explosive or other hazardous conditions.
I
There is a slight chance your phone could be damaged by an electrical storm.
I
We recommend that you unplug the power and telephone line cord during an
electrical storm.

Connecting to a switchboard

Switchboard compatibility
This telephone may be connected to most types of switchboard, however in the event
of any difficulties, consult your switchboard Service Provider.

Dialling mode

Your BT Zenith Flip is set to Tone dialling. Some older switchboards may require
Pulse dialling. To change the dialling mode, see 'Dial mode', page 65.
If you experience any problems, please call the Helpline on 0870 605 8047
BT Zenith Flip – Issue 1 – Edition 04 – 08.09.05 – 6861