Table of Contents
Advertisement
Additional handsets and bases
70
If you experience any problems, please call the Helpline on 0870 605 8047
BT Zenith Flip – Issue 1 – Edition 04 – 08.09.05 – 6861
Up to 5 handsets can be registered and operated from
the BT Zenith Flip. Each handset can be registered with
up to four bases. You can make internal calls between
two handsets while third is making an external call.
Register a new BT Zenith Flip handset to your
BT Zenith Flip base
Insert batteries on the handset, charge the handset for
24 hours.
Make sure the handset is close to the base.
At the base:
Press and hold
The In Use light flashes. You now have 90 seconds to
register the handset.
At the handset:
1. Select
Registration
highlighted.
2. Select
UP/DOWN
indicated by a
3. Enter the base's SYSTEM PIN (original setting
Select
until the base gives a double beep.
Menu
then scroll
UP/DOWN/LEFT/RIGHT
. Select
OK
.
Register Handset
OK
. If you have more than one base, scroll
to select the base. Bases already in use are
. Select
OK
.
*
OK
to begin registration.
to
is
0000
).
Advertisement
Table of Contents
