Using The Phone; Switch The Handset On/Off; Make A Call; Preparatory Dialling - BT Concero 1400 User Manual

Digital cordless phone with answering machine
Table of Contents

Advertisement

Using the phone

Switch the handset on/off

1. Press and hold
for 5 seconds to switch the handset on
and off.

Make a call

1. Press
.
Enter the telephone number and the number is dialled.

Preparatory dialling

Use preparatory dialling to see and check the number on the
display before you dial out. The display can only show 11 digits at
a time, if you enter a number with more than 11 digits, will be
displayed to the left of the number to indicate more digits.
1. Enter the number first then press

End a call

1. Press
or place the handset back on the base.

Receiving calls

When you receive an incoming call, the telephone will ring and
the
icon will flash. The In use light on the base will also flash.
1. If the handset is not in the base/charger, press
the call.
Or
If the handset is on the base/charger, lift the handset to
answer the call.
2. To turn the handset ringer off when receiving a call press the
Right soft key . The display will briefly show
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or visit www.bt.com/producthelp
to dial.
to answer
.
VOlUMe OFF
Call timer
Your handset automatically displays
the duration of every external call.
The call time will remain on the
display until 5 seconds after the call
has ended.
Press Right soft key
to
delete an incorrect digit when
preparatory dialling.
If you have subscribed to a Caller
Display service, your caller's number
will also be shown. If the number
is withheld the display will show
. If an exact number match
WiThhelD
is found in the Phonebook, the name
will alternate with the number in
the display. See page 29 for more
information.
Internal calls
When you receive an internal call, the
calling handset number will be shown
on the handset display.
If two handsets are engaged on an
internal call and an external incoming
call is received, beeps will be emitted
at both internal handsets. The
internal call has to be ended before
the external call can be answered.
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents