BT Zenith Flip 6861 User Manual page 33

4. If there are no entries,
displayed. Scroll to
Or
If there are entries already stored, select
scroll UP or DOWN
5. Select OK to begin copying.
Or, if you have PIN protection: Enter the SIM PIN Code
when prompted and then select
The handset shows the position of the entry in the SIM
card and the name being copied. If no name has been
stored for an entry the display shows "
copying is finished the display shows
If you experience any problems, please call the Helpline on 0870 605 8047
BT Zenith Flip – Issue 1 – Edition 04 – 08.09.05 – 6861
Add Entry and Copy From Sim
Copy From Sim .
to Copy From Sim .
OK to begin copying.
———————
Done
are
If you forget your PIN or if the
SIM card becomes locked because
the wrong code has been entered,
contact your mobile phone provider.
Please note your BT Zenith Flip will
Options and
only accept 4 digit PIN codes if your
PIN code on your mobile phone is
longer than 4 digits, either disable
the PIN or change it to 4 digits.
WARNING
Keep SIM cards away from small
children as they are a possible
choking hazard.
If the handset phonebook becomes
full during copying, the display
" When
shows
.
stops.
Using the phonebook
MEMORY FULL and copying
33