Handset Priority; Dial Mode - BT Zenith Flip 6861 User Manual

Handset priority

1. Select Menu and scroll
Settings . Select OK
2. Select OK . Use UP
All Handsets – all handsets ring together. Select
Select Handset – to choose one handset to ring first.
Select OK then scroll
want, and select OK
how many rings the handset will give before the other
handsets start ringing as well. Select
Display shows Handset Priority Saved
3. Select Back to return to the previous screen.

Dial mode

1. Select Menu and scroll
Settings . Select OK
2. Select OK . The current setting is highlighted.
3. Press UP or DOWN
Select OK to confirm.
4. Select Back to return to the previous screen.
If you experience any problems, please call the Helpline on 0870 605 8047
BT Zenith Flip – Issue 1 – Edition 04 – 08.09.05 – 6861
UP/DOWN/LEFT/RIGHT
. Scroll DOWN to Handset Priority
or DOWN to select from:
UP or DOWN to the handset you
. Now scroll UP or DOWN
OK .
.
UP/DOWN/LEFT/RIGHT
. Scroll DOWN to Dial Mode
to select Tone Mode
to Base
If you have more than one handset
registered to your base, they all
.
ring at the same time.
With handset priority, you can set
one handset to ring before the
OK
others.
to select
Switch to Pulse during a call
If you have dialled out from a
to Base
switchboard using Pulse dialling,
you can switch to Tone dialling
.
during the call by pressing and
holding the
See also, Connecting to a
or Pulse Mode .
switchboard, page 80.
Your BT Zenith Flip is set to TONE
dialling. You should never need to
change this unless connected to a
switchboard that requires PULSE
dialling. Check with your
switchboard supplier.
Base settings 65
button.