Horizontal Offset; Vertical Offset; Print Speed; Cutting Options - Brady BradyPrinter i3300 User Manual

Horizontal Offset

Use the slider to the image (printed portion of the label) to the right or left.The number shown on the
slider indicates how much the beginning print position will shift relative to the factory setting; it does not
represent the distance from the left edge of the label.

Vertical Offset

Use the slider to shift print up or down on the labels. The number shown on the slider indicates how
much the beginning print position will shift relative to the factory setting; it does not represent the
distance from the top edge of the label.

Print Speed

Print speed lets you adjust the speed setting from 1 to 4 inches per second (ips). Optimal print speed
settings are set automatically by the smart cell for the installed supply and should only be changed if
you are experiencing problems. For example, you can change print speed if you want to print graphics
or other densely populated labels more slowly to ensure complete coverage.
Use the slider to increase or decrease the speed.
Note: The selected print speed setting will stay in effect for all subsequent print jobs with the
currently installed supply. When new supply is installed, the print speed is reset to the default
setting. The print speed level is also reset by rebooting the system.

Cutting Options

Use this setting to set the cut location. Depending on the selected cut settings, the printer advances
the label to tear/cut between labels, at the end of the job, or never. If no setting is used, the default will
be the cut location set in Brady Workstation.
Note: The label size for die-cut labels is already set and cannot be adjusted.
BradyPrinter i3300
Printing Labels
Print Adjustments
21