Brady BradyPrinter i3300 User Manual page 38

4. Clean metal cutting blade [9]:
5. Close the cutting blade by pushing up on the exit chute until the cutter tabs snap into place.
Note: You may need to hold print head door up slightly to access the exit chute.
6. Replace the ribbon and label cartridges.
7. Close all covers and plug in the power cord.
BradyPrinter i3300
a. If the cutting blade shows significant residue, use the cutter cleaning tool in the
cleaning kit to gently scrape the reside off the cutting blade.
b. Moisten one of the foam swabs from the cleaning kit with the alcohol. Do not allow
the alcohol to drip from the swab.
c. Clean cutting blade with moistened swab until all residue is removed.
d. Clean beneath the edges of the blade housing with moistened swab. To avoid
forcing residue deeper into the machine, use motions from the outer edge of the
blade toward the center.
e. Continue cleaning until no residue is visible and clean swabs do not become
discolored.
Maintenance
Cleaning the Printer
9d
9e
31