Printing Labels
Adjusting Print Offset
Adjusting Print Offset
5-8
Print Offset is a value that will move the image from its "nominal" position slightly
in one direction or another on the label. Adjust Offset is typically used to do a fine
adjustment of the printed image on a die-cut label, or to move the image slightly
closer or further from the edge of a continuous supply.
To adjust the print offset:
1. With a defined label in the Editor, select Print
2. In the Print dialog, select Advanced Settings
3. In the Adjust Offset area, enter a value in the horizontal and/or vertical offset
boxes:
•
Horizontal Offset: shifts the image (printed portion of the label) to the
right or left.
•
Vertical Offset: shifts the image (printed portion of the label) up or down.
.
.
®
BBP
85 Label Printer User's Manual