Configuring Other Networks; Configuring A Direct Usb Connection - Brady BradyPrinter i3300 User Manual

9. If you chose Static in step 6, configure the following settings.
a. Tap IP Address to display a keypad and then type the IP address of the printer. Tap the enter
b. Tap Subnet Mask and enter a subnet mask if you are using one.
c. Tap Default Gateway to enter the default gateway.
10. Tap

Configuring Other Networks

Configuration for personal or enterprise networks.
1. Touch the Menu button at the top of the Home screen.
2. Tap Settings.
3. On the Settings screen, select Connection.
4. Tap Wi-Fi Network on the Connection screen.
•
5. Scroll to the bottom of the list of available networks and select Other.
6. On the Other Networks screen, choose Personal or Enterprise network and fill in the
necessary details.
7. Tap

Configuring a Direct USB Connection

To communicate directly with a USB cable, you will need the USB device driver installed on your PC.
Once connected, the computer should automatically detect and install the USB driver, if it is not
already installed.
1. Attach the USB cable to the printer and computer.
2. Turn the printer on.
On the computer, "Found New Hardware" pops up in the lower right corner of the screen and
the print driver wizard is launched.
3. In the wizard
Click
4.
The print driver installs. This takes a minute or two.
5. When complete, in the wizard,
BradyPrinter i3300
button when finished.
to return to the Home screen.
.
If Wi-Fi is disabled, check the box next to Enabled and wait for the Network list to populate.
when finished.
, click
Install the software automatically (if it is not already selected).
.
Next
click .
Finish
Setup
Connecting the Printer
16