Table of Contents
Advertisement
7.4 Paper path
Structure
Parameter counter
The parameter <paper path> is two bytes Binary code that indicate current paper path.
Following information is replied.
Paper Path
Cut Sheet (Auto Select)
*1: In the case of selecting remote 'PP' command with ASF Large Capacity, code becomes 01FFh irrespective of the paper
path.
7.5 Cleaning time information
Structure
Parameter counter
The parameter <cleaning time information> is two bytes Binary codes that indicate cleaning time or ink filling time.
The unit is second. (This time is total time not passage time or remains time.)
This parameter is added only when status code ST = 07H.
Revision: 1
Item
Byte (Hex)
Header
1
1
Parameter
2
Item
Byte (Hex)
Header
1
1
Parameter
2
Value (Hex)
06
02
Paper path information
code
01FF
Value (Hex)
0C
02
Cleaning time information
2013/12/18
Page: 82
Advertisement
Table of Contents
