Table of Contents
Advertisement
5.1.2 Initialize printer ESC @
ESC @
[Name]
[Format]
[Range of Definition]
[Function]
[Initial State]
[Related Commands]
Revision: 1
Initialize printer
1BH, 40H
-
1) The various settings are returned to their initial values.
2) The Y axis origin of the page management coordinate system and the position management
coordinate system are set to the current printing position on the Y axis.
3) The present printing position on the X axis is set to the origin upon the X axis.
4) Text mode printing is selected.
-
[Setting] Commands whose settings are affected by this command.
The settings for all commands are returned to their initial states.
[Setting] Commands that change the effects of this command.
None
[Operation] Commands whose functionality is affected by this command.
None
[Operation] Commands that change the effects of this command.
None
Ver 1.00
[Setting]
2013/12/18
Page: 27
Advertisement
Table of Contents
