Select Microweave Printing Mode Esc - Epson XP-410 Programming Manual

5.1.19 Select MicroWeave printing mode ESC (i
ESC (i
[Name]
[Format]
[Range of Definition]
[Function]
[Initial State]
[Related Commands]
Revision: 1
Select MicroWeave printing mode
1BH, 28H, 69H, 01H, 00H, n
n=00H, 01H, 30H, 31H
1) Selects / deselects the MicroWeave mode.
all parameters : deselects
Non-MicroWeave mode
[Setting] Commands whose settings are affected by this command.
This command changes the non-selected state set by either the ESC (G or ESC @
commands.
[Setting] Commands that change the effects of this command.
The ESC (G command sets the non-selected state.
The ESC @ command sets the non-selected state.
[Operation] Commands whose functionality is affected by this command.
None
[Operation] Commands that change the effects of this command.
None
Ver 1.00
[Operation]
2013/12/18
Page: 44