Using Additional Handsets; Registering A New Bt Elements Handset - BT Digital Cordless Telephone User Manual

Using additional handsets

You can use up to five GAP compatible handsets with your BT
Elements base to extend your phone system without needing
to install extension sockets for each new phone.
Your BT Elements handset can be registered to up to 4 bases.
You can then select the base you would prefer
to use.
You need to register any additional handsets you purchase to
your BT Elements base.

Registering a new BT Elements handset

At the base:
1. Press and hold
The base will now remain in registration mode for 90 seconds,
during which time you will need to complete the following
procedure.
At the new handset:
Menu
2. Press to open the main menu.
3. Press or
Menu
press .
4. Press or
5. Enter a base number (from 1 to 4) and press
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
Elements – New Style – Edition 4 – 31.08.06 – 7644
until you hear a beep, then release it.
until is displayed, then
Register
to highlight and press
Reg Base
Additional handsets must be fully
charged before attempting to register.
If the handset is already registered to
Menu
.
a base, the base number will flash.
Menu The default PIN code is 0000.
.
53