Registering Additional Handsets - BT BT3930 User Manual

Registering additional
handsets
You can use up to five BT3930 handsets with your
BT3930 base to extend your phone system without needing to
install telephone extension sockets for each new phone.
If you have purchased a BT3930 multiple pack any additional
handsets come pre-registered to the base.
If you have purchased an additional handset separately you must
register it to your BT3930 base before it can be used.
Registering a handset
1. Press the Left soft key Menu then
is displayed, then press
REGISTRATION
is displayed. Enter the base PIN (original setting=0000)
2.
PIN?
and press .
3. The handset will display
button on the base until you hear a long beep.
4. The handset will temporarily display
display .
HANDSET
When the registration has succeeded, the handset is
automatically assigned the next available handset number.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp
or
.
, press and hold the
SEARCHING
REGISTERED
Registering another make of handset
to your BT3930 base
If you want to register another
make of handset (i.e. not a BT3930
handset) to your BT3930 base
then you will need to follow the
Registration instructions that came
with the handset first and then
continue with the base part
of the registration procedure
(as shown opposite from point 3).
Please note that registering other
types of handset will only provide
until
limited compatibility i.e. you may
only be able to make and receive calls
on the additional handset.
You have 60 seconds to complete the
registration process.
If registration is not successful first
time, please repeat the process again
in case the base registration period
then will ran out of time.
If there are already 5 handsets
registered to the base, the
registration will fail. You must
de-register (delete) another handset
before you can register the new one.
See page 28, "Delete handset"
for instructions.
42