Bt Elements Base - BT Digital Cordless Telephone User Manual

54 Using additional handsets
If registration is unsuccessful, the
handset will return to standby mode.
Try moving closer to the base you
want to register to and following the
registration procedure again.
Handsets must be GAP compatible to
be able to be registered to your BT
Elements base.
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
Elements – New Style – Edition 4 – 31.08.06 – 7644
6. Enter the 4 digit PIN code and press
When the base is located, your handset will display the base
ID number, press
cancel by pressing
The handset is automatically allocated the next available
handset number which is displayed when in standby mode.
Registering another type of handset to your BT Elements
base
At the base:
1. Press and hold
The base will now remain in registration mode for 90 seconds,
during which time you will need to complete the registration
procedure shown in the other manufacturer's user manual.
Menu
.
Menu
to confirm registration to this base or
.
until you hear a beep, then release it.