Declaration Of Conformance; Connecting To A Switchboard; Inserting A Pause; Recall - BT Digital Cordless Telephone User Manual

70 General information
For your records
Date of purchase:
Place of purchase:
Serial number:
For guarantee purposes proof of purchase is required
so please keep your receipt.

Declaration of Conformance

Hereby, Suncorp Technologies declares that this BT
Elements is in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC.
The Declaration of Conformance for the BT Elements
is published on the website:
http://www.suncorptech.com/bt
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
Elements – New Style – Edition 4 – 31.08.06 – 7644

Connecting to a switchboard

This product is intended for use within the UK for
connection to the public telephone network and
compatible switchboards, which support tone and
pulse dialling and timed break recall. If in doubt
please consult your service provider.

Inserting a pause

With some switchboards, after dialling the access
code you may have to wait for a moment while the
switchboard picks up an outside line so you will need
to enter a pause in the dialling sequence.
Press to insert a pause (P) before entering the
telephone number.
You may also need to enter a pause when storing
international numbers or charge card numbers.

Recall

You may need to use the recall function if you are
connected to a switchboard/PBX (Private Branch
Exchange), contact your PBX supplier for further
information. The recall function is set to timed break
recall and is also used for BT Calling Feature.