Using Additional Handsets; Registering An Additional Handset; De-Registering A Handset - BT BT3950 Nuisance Call Blocker Quick Setup And User Manual

Using additional handsets

Registering an additional handset

If you bought your BT3950 as a multipack, all the
handsets that came with it will be registered at the
base. If you buy new handsets separately, you'll
need to register them before you can use them.
You can register up to four handsets and have to
complete the registration process in two minutes.
At the base:
1. Press and hold
minutes to register a handset.
At the handset:
1. Press , then press
Set. Then press
2. Press until Register is displayed. Press
3. You'll be asked to confirm your PIN. Type it in and
then press . When your handset is registered, it'll
be given a handset number.

De-registering a handset

1. Press , then press
2. Press until you come to Unregister. Press
3. Type your 4 digit PIN, then press
If you need some help, call us on 0800 145 6789* or go to bt.com/producthelp
for 5 seconds. You now have 2
until you see Advanced
.
to Advanced Set. Press
.
You can register up to four GAP
compliant handsets to your
BT3950 base to extend your
phone system without needing
to install telephone extension
sockets for each new phone.
You have 2 minutes to complete
the registration process.
If registration isn't successful
the first time, please try again
incase the base registration
period ran out of time.
If there are already four
handsets registered to the
base, the registration will fail.
You must de-register another
handset before you can register
the new one.
.
.
.
55