Restore Default Settings; Restore Default Settings Without A Pin - BT Digital Cordless Telephone User Manual

Restore default settings

You can restore your BT Elements phone to its default
(original) settings as described on page 34.
Menu
1. Press to open the main menu.
2. Press or
3. Press or
4. Enter the 4 digit PIN code and press
5. is displayed, press
Confirm?
handset will switch off, then switch back on again with the
default settings restored.

Restore default settings without a PIN

If you have forgotten your PIN code, you can restore your BT
Elements to the default settings following the procedure
shown below.
1. Unscrew and remove the belt clip and battery compartment
cover.
2. Remove the batteries for a few minutes. Press and hold
while still pressing the
observing the polarity markings (+ and -).
3. is displayed, press
Default
When the phone powers up, the default settings will
be restored.
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
Elements – New Style – Edition 4 – 31.08.06 – 7644
until is displayed, then press
Setup
to select and press
Default
Menu
.
Menu
to confirm the reset. The
button, insert the batteries again
Menu
.
Please note, restoring the default
settings will delete your phonebook,
redial and calls list.
Menu
.
Menu
.
Default PIN code setting is 0000.
,
Set-up menu 33