Table of Contents
Advertisement
16
ELECTRICAL SYSTEM
16.9
Checking the headlight setting
16.10
Adjusting the headlight range
–
Park the vehicle on a horizontal surface in front of a light-colored wall and make a mark
at the height of the center of the low beam headlight.
–
Make another mark at a distance
Guideline
Distance
–
Position the vehicle perpendicular to the wall at a distance
on the low beam.
Guideline
400726-10
Distance
–
The rider, with luggage and passenger if applicable, now mounts the motorcycle.
–
Check the headlight setting.
The light-dark boundary must lie exactly on the lower mark when the motorcycle is
ready to operate with the rider mounted along with any luggage and a passenger if
applicable.
»
If the boundary between light and dark does not meet specifications:
–
Adjust the headlight range. (
Preparatory work
–
Check the headlight setting. (
B
under the first mark.
B
A
p. 203)
5 cm (2 in)
A
from the wall and switch
5 m (16 ft)
p. 203)
203
Advertisement
Table of Contents
