Table of Contents
Advertisement
14
BRAKE SYSTEM
14.2
Checking the brake discs
Warning
Danger of accidents Worn-out brake discs reduce the braking effect.
–
Make sure that worn-out brake discs are replaced immediately. (Your authorized KTM workshop will be glad to help.)
trol of the brake force distribution between the two wheels, the braking force is optimally
distributed and the motorcycle is additionally stabilized.
Info
The MSC is only active in Road ABS mode.
–
Check the thickness of the front and rear brake discs at multiple points on each brake
disc to ensure it is at least thickness
Info
Wear will reduce the thickness of the brake disc at the contact surface
the brake linings.
Brake discs - wear limit
Front
400618-10
Rear
»
If the brake disc thickness is less than the specified value.
–
Change the front brake discs.
–
Change the rear brake discs.
–
Check the front and rear brake discs for damage, cracking, and deformation.
»
If the brake disc exhibits damage, cracking, or deformation:
–
Change the front brake discs.
A
.
4 mm (0.16 in)
4.5 mm (0.177 in)
166
1
of
Advertisement
Table of Contents
