Table of Contents
Advertisement
22
TROUBLESHOOTING
Faults
The combination instrument shows
nothing on the display
The engine does not turn if the emer-
gency OFF switch/electric starter but-
ton is pressed into the lower position
Engine turns only if the clutch lever is
drawn
Engine turns although a gear is
engaged
Engine turns but does not start
Engine dies during the trip
Malfunction indicator lamp lights up or
flashes
Possible cause
Fuse 1 blown
Main fuse burned out
The battery is discharged
Operating error
The battery is discharged
Safety start system is faulty
Electronic fault
The vehicle is in gear
Safety start system is faulty
Safety start system is faulty
The plug-in connection of the fuel hose
connection is not connected
Fault in fuel injection system
Fuel quality is insufficient
Lack of fuel
Fault in fuel injection system
Fault in fuel injection system
Action
–
Change the fuses in the fuse box. (
–
Change the main fuse. (
–
Recharge the battery.
–
Check the open-circuit current.
–
Carry out the start procedure. (
–
Recharge the battery.
–
Check the open-circuit current.
–
Read out the fault memory using the KTM diag-
nostics tool.
–
Read out the fault memory using the KTM diag-
nostics tool.
–
Shift the transmission to idle
–
Read out the fault memory using the KTM diag-
nostics tool.
–
Read out the fault memory using the KTM diag-
nostics tool.
–
Connect the plug-in connection of the fuel line.
–
Read out the fault memory using the KTM diag-
nostics tool.
–
Add suitable fuel.
–
Refuel. (
p. 126)
–
Read out the fault memory using the KTM diag-
nostics tool.
–
Read out the fault memory using the KTM diag-
nostics tool.
226
p. 200)
p. 198)
(
p. 193)
p. 113)
(
p. 193)
.
Advertisement
Table of Contents
