Service Schedule; Additional Information; Required Work - KTM 1290 Super Adventure S 2017 Owner's Manual

Hide thumbs Also See for 1290 Super Adventure S 2017:
Table of Contents

Advertisement

11

SERVICE SCHEDULE

11.1

Additional information

Any further work that results from the required work or from the recommended work must be ordered separately and invoiced separately.
Different service intervals may apply in your country, depending on the local operating conditions.
11.2

Required work

Read out the fault memory using the KTM diagnostics tool.
Check that the electrical system is functioning properly.
Change the engine oil and oil filter and clean the oil screens.
Check the front brake linings. (
Check the rear brake linings. (
Check the brake discs. (
Check the brake lines for damage and leakage.
Change the front brake fluid.
Change the rear brake fluid.
Change the hydraulic clutch fluid.
Check the brake fluid level of the front brake. (
Check the rear brake fluid level. (
Check/correct the fluid level of the hydraulic clutch. (
Check the shock absorber and fork for leaks. Perform service as needed and depending on how the vehicle is
used.
p. 169)
p. 173)
p. 166)
p. 167)
p. 170)
(
p. 213)
p. 145)
every 30,000 km (18,600 mi)
every 15,000 km (9,300 mi)
after 1,000 km (620 mi)
129
Every two years
Every year

Advertisement

Table of Contents
loading

Table of Contents