Table of Contents
Advertisement
8
ERGONOMICS
–
Remove screws
one side.
Info
Cover the components to protect them against damage.
Do not bend the cables and lines.
–
Remove screws
–
Place the handlebar supports in the required position. Mount and tighten screws
308080-01
Guideline
Screw, handlebar support
Info
Position the left and right handlebar supports evenly.
–
Position the handlebar.
Info
Make sure the cables and wiring are positioned correctly.
–
Position the handlebar clamps. Mount and evenly tighten screws
Guideline
Screw, handlebar clamp
V00739-10
The markings
bar clamps.
Markings
1
. Remove the handlebar clamps. Remove the handlebar and lay it to
2
. Take off the handlebar supports.
M10
A
of the handlebar scale are located centrally between the handle-
B
face backwards.
40 Nm
Loctite
(29.5 lbf ft)
1
.
M8
20 Nm
(14.8 lbf ft)
96
2
.
®
243™
Advertisement
Table of Contents
