Dimm Installation; Dimm Removal - Supermicro X11DPX-T User Manual

Super X11DPX-T User's Manual

DIMM Installation

1. Insert the desired number of DIMMs into
the memory slots, starting with P1-DIMM
A1. For the system to work properly,
please use memory modules of the same
type and speed on the motherboard.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Use two thumbs together to press the
notches on both ends of the module
straight down into the slot until the module
snaps into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.

DIMM Removal

Press the release tabs on both ends of the
DIMM socket to release the DIMM module from
the socket as shown in the drawing below.
Warnings: 1. Please do not use excessive force when pressing the release tabs on the ends
of the DIMM socket to avoid causing any damage to the DIMM module or the DIMM socket.
2. Please handle DIMM modules with care. Carefully follow all the instructions given on Page
1 of this chapter to prevent ESD-related damages to your memory modules or components.
DESIGNED IN USA
BMC
LAN
X11DPX-T
CTRL
REV:1.01A
BIOS
LICENSE
PCH
IPMI CODE
BAR CODE
SAN MAC
MAC CODE
Release Tabs
Insert the DIMM module into the memory slot.
40
CPU2
CPU1
Notches