Supermicro X11DPX-T User Manual page 48

Super X11DPX-T User's Manual
Reset Button
The Reset Button connection is located on pins 3 and 4 of JF1. Attach it to a hardware reset
switch on the computer case to reset the system. Refer to the table below for pin definitions.
Power Button
The Power Button connection is located on pins 1 and 2 of JF1. Momentarily contacting both
pins will power on/off the system. This button can also be configured to function as a suspend
button (with a setting in the BIOS - see
mode, press the button for at least 4 seconds. Refer to the table below for pin definitions.
1 2
2
Power Button Ground
1
Reset Button Ground
Power Fail LED
3.3V
UID LED OH/PWR Fail/Fan Fail LED
3.3V Stby
NIC2 Active LED
3.3V Stby
NIC1 Active LED
3.3V Stby
HDD LED
PWR LED
3.3V
x x
Ground
NMI
19 20
Reset Button
Pin Definitions (JF1)
Pin# Definition
3 Reset
4 Ground
Chapter 4). To turn off the power in the suspend
Power Button
Pin Definitions (JF1)
Pin# Definition
1 Signal
2 Ground
48
1. Reset Button
2. Power Button