Motherboard Features - Supermicro X11DPX-T User Manual

Motherboard Features

CPU
•
Dual Intel Xeon Scalable-SP and 2nd Gen Intel Xeon Scalable-SP processors (Socket P) with three Intel UltraPath
Interconnect (UPI) links of up to 10.4 GT/s
Note: For the latest CPU/memory updates, please refer to our website at http://www.supermicro.com/products/
motherboard.
Memory
•
Integrated memory controller embedded in the processor supports up to 4TB of 3DS Load Reduced DIMM (3DS LRDIMM),
3DS Registered DIMM (3DS RDIMM), or up to 2TB of Load Registered DIMM (LRDIMM), with speeds of 2933*/2666/24
00/2133/1866/1600/1333 MHz modules in 16 memory slots
Notes: 1. The memory capacity support will differ according to the processor SKUs. 2. Up to 2TB DCPMM memory
is supported (2nd Gen Intel Xeon Scalable-SP 82xx/62xx/52xx/4215 series processors only). 3. Support for 2933MHz
memory is dependent on the CPU SKU. 4. Refer to page
DIMM Size
•
Up to 256GB at 1.2V
Note 1: Memory speed support depends on the processors used in the system.
Note 2: For the latest CPU/memory updates, please refer to our website at
motherboard.
Chipset
•
Intel C621
Expansion Slots
•
Two PCIe 3.0 x16 Slots (Slot4, Slot8)
•
Two PCIe 3.0 x16 Slots (Slot2, Slot6), or four PCIe 3.0 x8 Slots (Slot1, Slot2, Slot5, Slot6)
•
Two PCIe 3.0 x8 Slots (Slot9, Slot10)
•
One PCIe 3.0 x4 in x8 Slot (Slot11)
Non Volatile Memory Express (NVMe) Slot
•
One PCIe 3.0 x4 M.2 Slot
•
M.2 Form Factor: 2280, 22110
•
M.2 Key: M-Key
BaseBoard Management Controller (BMC)
•
ASPEED AST2500 Baseboard Controller (BMC) supports IPMI 2.0
•
One IPMI_dedicated_LAN located on the rear IO back panel
Graphics
•
Graphics controller via ASPEED AST2500 BMC
Note: The table above is continued on the next page.
Motherboard Features
35 for detailed DDR4 memory support list.
15
Chapter 1: Introduction
http://www.supermicro.com/products/