Table of Contents
Advertisement
Appendix D: UEFI BIOS Recovery
9. When the UEFI Shell prompt appears, type fs# to change the device directory path. Go
to the directory that contains the BIOS package you extracted earlier from
Step
2. Enter
flash.nsh BIOSname#.### at the prompt to start the BIOS update process.
Note: Do not interrupt this process until the BIOS flashing is complete.
10. After loading defaThe screen above indicates that the BIOS update process has
completed. Reboot the system when you see the screen below.
183
Advertisement
Table of Contents
