Table of Contents
Advertisement
Super X11DPX-T User's Manual
MMCFG Base
Use this feature to select the default value for the PCI MMIO (Memory-Mapped IO) base
address. The options are 1G, 1.5G, 1.75G, 2G, 2.25G, and 3G.
NVMe Firmware Source
Use this feature to select the NVMe firmware to support booting. The options are Vendor
Defined Firmware and AMI Native Support. The default option, Vendor Defined Firmware,
is pre-installed on the drive and may resolve errata or enable innovative functions for the
drive. The other option, AMI Native Support, is offered by the BIOS with a generic method.
VGA Priority
Use this feature to select the graphics device to be used as the primary video display for
system boot. The options are Onboard and Offboard.
RSC-UMR-8 SLOT1 PCI-E x8 OPROM
RSC-UMR-8 M.2_PCIe OPROM
Select Disabled to deactivate the selected slot, Legacy to activate the slot in legacy mode,
and EFI to activate the slot in EFI mode. The options are Disabled, Legacy, and EFI.
Onboard LAN Option ROM Type
Select an option to enable Option ROM support to boot the computer using a device specified
by the user. The options are Legacy and EFI.
Onboard LAN1 Option ROM
Onboard LAN2 Option ROM
Use the above two features to select the type of device installed in a LAN port specified by
the user for system boot. The default setting for Onboard LAN1 Option ROM is PXE, and the
default setting for Onboard LAN2 Option ROM is Disabled.
Onboard NVMe1 Option ROM
Onboard NVMe2 Option ROM
Onboard NVMe3 Option ROM
Onboard NVMe4 Option ROM
Use the above four features to select the type of the device installed on an NVMe port specified
by the user for system boot. The options are Disabled, Legacy, and EFI.
Onboard Video Option ROM
Select Legacy to boot the system using a legacy video device installed on the motherboard.
The options are Disabled, Legacy, and EFI.
100
Advertisement
Table of Contents
