Lexmark CX920 User Manual page 65

Faxing
1
Connect one end of the telephone cable to the line port of the printer.
2
Connect the other end of the cable to the port labeled Phone Line 1 or Phone Port on the cable modem.
3
Connect your analog telephone to the telephone port of the printer.
Note: To check if the telephone port on the cable modem is active, connect an analog telephone, and then
listen for a dial tone.
Setup 2: Printer is connected to a wall jack; cable modem is installed elsewhere in the
facility
1
Connect one end of the telephone cable to the line port of the printer.
2
Connect the other end of the cable to an active analog telephone wall jack.
3
Connect your analog telephone to the telephone port of the printer.
65