Lexmark CX920 User Manual page 140

Understanding the printer menus
Menu item
Enable TLSv1.1
Off
On*
SSL Cipher List
Note: An asterisk (*) next to a value indicates the factory default setting.
SNMP
Note: This menu appears only in network printers or printers that are attached to print servers.
Menu item
SNMP Versions 1 and 2c
Enabled
Off
On*
Allow SNMP Set
Off
On*
Enable PPM MIB
Off
On*
SNMP Community
SNMP Version 3
Enabled
Off
On*
Set Read/Write Credentials
User Name
Password
Set Read‑only Credentials
User Name
Password
Authentication Hash
MD5
SHA1*
Minimum Authentication Level
No Authentication, No Privacy
Authentication, No Privacy
Authentication, Privacy*
Privacy Algorithm
DES
AES‑128*
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Enable the TLSv1.1 protocol.
Specify the cipher algorithms to use for the SSL or the TLS connections.
Description
Configure Simple Network Management Protocol (SNMP) versions 1
and 2c to install print drivers and applications.
Configure SNMP version 3 to install and update the printer security.
140