Lexmark CX920 User Manual page 143

Understanding the printer menus
Menu item
Enable FTP/TFTP
Off
On*
Local Domains
HTTP Proxy IP Address
FTP Proxy IP Address
HTTP Default IP Port
HTTPS Device Certificate
FTP Default IP Port
Timeout for HTTP/FTP
Requests
1–299 (30*)
Retries for HTTP/FTP Requests
1–299 (3*)
Note: An asterisk (*) next to a value indicates the factory default setting.
ThinPrint
Menu item
Enable ThinPrint
Off*
On
Port Number
4000–4999 (4000*)
Bandwidth (bits/sec)
100–1000000 (0*)
Packet Size (kbytes)
0–64000 (0*)
Note: An asterisk (*) next to a value indicates the factory default setting.
USB
Menu item Description
PCL SmartSwitch Set the printer to switch to PCL emulation when a print job received through a USB port requires
it, regardless of the default printer language.
Off
On* Note: When this setting is disabled, the printer does not examine incoming data and uses the
default printer language specified in the Setup menu.
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Send files using FTP/TFTP.
Specify domain names for HTTP and FTP servers.
Configure the HTTP and FTP server settings.
Specify the amount of time before the server connection stops.
Set the number of retries to connect to the HTTP/FTP server.
Description
Print using ThinPrint.
Set the port number for the ThinPrint server.
Set the speed to transmit data in a ThinPrint environment.
Set the packet size for data transmission.
143