Upgrading and migrating
6
Remove the controller board shield.
7
Unpack the memory card.
Warning—Potential Damage: Avoid touching the connection points along the edge of the card.
8
Insert the memory card until it clicks into place.
9
Attach the shield, and then attach the access cover.
10
Attach the connector cover.
11
If you removed a filter cover, then attach the cover.
12
Connect the power cord to the electrical outlet, and then turn on the printer.
CAUTION—POTENTIAL INJURY: To avoid the risk of fire or electrical shock, connect the power cord
to an appropriately rated and properly grounded electrical outlet that is near the product and easily
accessible.
269