Konica Minolta BIZHUB 367 User Manual page 59

2.9 Account Track Setting Function
5
Touch [Password].
6
From the keyboard, enter a new Account Password.
To prevent entry of a wrong password, enter the password again in [Password Confirmation].
% Touch [C] to clear all characters.
% Touch [Delete] to delete the last character entered.
% Touch [Shift] to show the upper case/symbol screen.
% Touch [Cancel] to go back to the previous screen.
7
Touch [OK].
% If the entered Account Password does not meet the Password Rules, a message that tells that the
entered Account Password cannot be used appears. Enter the correct Account Password. For de-
tails of the Password Rules, see page 1-12.
% If the entered Account Password does not match, a message that tells that the Account Password
does not match appears. Enter the correct Account Password.
8
Make the necessary settings.
% If the Account Name is yet to be entered, [OK] cannot be touched. Be sure to enter the Account
Name.
% An Account Name that already exists cannot be redundantly registered.
% To suspend temporarily a registered account from using the machine, touch [Pause] and select
[Stop Job]. If [Stop Job] is selected, a user who belongs to that particular account is also temporarily
suspended from using the machine.
% To restrict the functions the account can use, use [Function Permission] and set Allow or Restrict
for each function. Setting [All Accounts] applies the same [Function Permission] to all accounts.
9
Touch [OK].
bizhub 367/287/227
2
2-38