Konica Minolta BIZHUB 367 User Manual page 144

4.1 Data Administrator
3
Check the settings on the "Import the device information" screen and click [Import].
% The following screen appears if [Authentication Settings/Address Settings] is selected in step 2.
% The following screen appears if [Administrator settings] is selected in step 2.
4
Type the Administrator Password registered in the machine and click [OK].
% If the "Save" check box has been selected, the Administrator Password entered is stored in the PC
being used. If you do not want the Administrator Password stored, clear the "Save" check box.
% If a wrong Administrator Password is entered, a message appears that tells that there is a mismatch
in the passwords. Enter the correct Administrator Password.
% If the "Save" check box is selected, enter the Administrator Password once again to make sure that
the Administrator Password has been entered correctly.
bizhub 367/287/227
4
4-3