Ssl Setting - Konica Minolta BIZHUB 367 User Manual

2.16 SSL Setting Function
2.16.2

SSL Setting

Related setting (for the administrator)
When making the SSL Setting, be sure to make sure in advance that the device certificate has been registered
in the machine. For the procedure to register the device certificate, see page 2-84.
0
For call the PKI Settings screen on the display, see steps 1 and 2 of page 2-84.
0
Do not leave the machine with the Admin Mode setting screen left shown on the display. If it is abso-
lutely necessary to leave the machine, be sure first to log off from the Admin Mode.
1
Start Web Connection and call the PKI Settings screen on the display.
2
Click [SSL Setting] from the menu.
3
Set "Mode using SSL/TLS" and "Encryption Strength" and click [OK].
% Select "Admin. Mode and User Mode" for "Mode using SSL/TLS."
% For encryption strength, select the strong "AES-256, 3DES-168."
% The Enhanced Security Mode is canceled, if setting containing strength lower than AES/3DES is se-
lected when the Enhanced Security Mode is [ON].
% Cancel the selection of "SSLv3" of SSL/TLS Version Setting.
4
Click [OK].
bizhub 367/287/227
2
2-86