Table of Contents
Advertisement
Note
• If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP server, the
device will appear as APIPA in the BRAdmin Professional utility screen.
• You can find the node name and Ethernet address (Node Address above) by printing out the Network
Configuration List. See Printing the Network Configuration List on page 104 for information on how to print
the Network Configuration List on your print server.
Using the control panel to change the print server settings
You can configure and change the print server settings using the control panel LAN menu. See Control panel
setup on page 76.
Using the Remote Setup to change the print server settings
Remote Setup for Windows
The Remote Setup application allows you to configure network settings from a Windows
you access this application, the settings on your machine will be downloaded automatically to your PC and
displayed on your PC screen. If you change the settings, you can upload them directly to the machine.
a
Click the Start button, All Programs
1
Programs for Windows
b
Enter a password if you have set it.
c
Click TCP/IP (WLAN).
d
You can now change the print server settings.
Remote Setup for Macintosh
The Remote Setup application allows you to configure network setting from a Macintosh
this application, the settings on your machine will be downloaded automatically to your Macintosh
displayed on your Macintosh
machine.
a
Double click the Mac OS X or Macintosh HD (Startup Disk) icon on your desktop, Library, Printers,
Oce, then Utilities.
b
Double click the Remote Setup icon.
c
Enter a password if you have set it.
d
Click TCP/IP (WLAN).
e
You can now change the print server settings.
®
1
, Oce, cx2100, then Remote Setup.
®
2000 users
®
®
screen. If you change the settings, you can upload them directly to the
Configuring your machine for a wireless network
®
computer. When
®
. When you access
3
3
3
3
3
®
and
30
Advertisement
Table of Contents
Troubleshooting
