Console Cable Pinouts - Siemens RUGGEDCOM WIN7000 Installation Manual

Appendix A
Connector and Cable Pinouts

Console Cable Pinouts

NOTE
In normal operation, the console connector should remain closed and should only be used by an
authorized technician.
The console connection is a 3-pin female connector, based on the RS-232 serial standard. The port provides a
standard terminal connection through which a technician can configure and monitor the base station through its
command line interface (CLI).
• Cable type: 3 wire 28AWG
• Cable connectors: proprietary 3 pin console connector; DBF9
• Cable length: 2m
• The cable is supplied by Siemens.
Figure 39: 3-pin Console Connector Pinout
Table: WIN7000 Console Connector Pinout
3-Pin Connector Pin Number
1
3
4
44
Figure 40: DB9F Console Connector Pinout
DB9F Connector Pin Number
2
3
5
RUGGEDCOM WIN7000
Installation Guide
Connection
TX
RX
GND
Console Cable Pinouts