Table of Contents
Advertisement
Chapter 3
Installation Procedures
Figure 17: Installing the GPS Antenna
2.
Connect the GPS cable (TNC female connector) between the antenna and the base station.
Section 3.4.9
2.3GHz Band Cavity Filters Installation
To comply with FCC limits, the unit must be connected to cavity filters (for full-power configuration only).
Follow these steps to assemble the 2.3GHz cavity filters and connect them to the base station antennas.
There are two types of cavity filters: one for A+B band, and one for C+D band.
Figure 18: A+B Band Cavity Filter
22
RUGGEDCOM WIN7000
Installation Guide
2.3GHz Band Cavity Filters Installation
Advertisement
Table of Contents
